Image source: http://www.sellingshelf.com/gallery/tem5/OS396-tem5-1.jpg
Power drills are toolbox staples of casual DIYers and professionals alike, together with a wide selection of drill bits. Among the most popular drill bits is twist pieces, the ones with double flutes which extend up the sides finishing to a sharp line.
In the event the owner of the toolbox works with a lot of wood because of his occupation, then it likely may also have auger bits, brad point bits and perhaps even Forstner bits. And also you may add driving bits in that toolbox since they are useful for quickly forcing Phillips head screws straight into position. However, one kind of drill bit that's much less commonly seen in toolboxes along with the other pieces would be your diamond drill bit.
If you are reading this, then you probably will need to use a diamond drill bit soon or are thinking about using one. Following is a quick guide to diamond drill bits.
1. What are they used for?
Diamond drill bits are utilized to drill holes through tough or delicate materials like glass, stone, ceramic materials, as well as bones. They are often used on sea glass, beach glass, rock, precious gems, pebbles, ceramic tiles, glazed pottery, shells, antlers and fossils.
Many jewellery manufacturers utilize small diamond drill bits for producing holes. People working with glass use diamond core exercises that are as little as 1mm.
Diamond is the hardest substance in the Mohs scale and the Vickers test, therefore any material could be drilled or cut with a diamond.
2. How fast should I operate?
The paradox of superstrong materials is they can easily get ruined when its construction is compromised throughout the drilling process. Always go slow when drilling with a diamond drill bit, particularly at the beginning. This will aid in preventing fractures and little breakages from the material and help lengthen the working life of your drill bit.
Always use the lowest setting on the drill, simply raising the rate halfway through the material. Turn down it again when you're nearing the other hand.
3. What could they look like?
Diamond core drill bits are designed so that water may flow inside and outside around the drill bit to keep it cool and to assist in debris removal. The water also prevents fractures and fissures in the material being drilled. They are occasionally seen in a wide choice of sizes, to match a host of several applications and requirements.
There are two main kinds of drill bits: Electroplated and Sintered diamond drill bits.
Electroplated drill bits have one layer of coating on the steel shank. After the diamond jacket has worn out, you'll want to replace it with a brand-new drill bit.
Sintered drill bits have many layers of diamonds on the steel shank. Because there are lots of coating layers, sintered drill bits are somewhat pricier than their electroplated cousins. But they last for a longer period. Sintered pieces require cleaning with an aluminium oxide rock before and after each use to expose a fresh diamond coat.
4. Just how long can they live?
Your drill bit's lifespan is dependent on your own speed, the sort of oil used, pressure, as well as the density of the substance. There is no clear reply to this one, however, a diamond drill bit used to cut through bone tends to last far longer than one used to drill holes in sapphires and granite.
Never neglect to keep the speed in the lowest setting, and keep the drill bit cool with a great deal of water.
5. What are some common issues?
Since diamond drill bits are ideally used at the lowest speed setting, the drill bit should never feel warm or hot to the touch. If you smell burning, then turn off the drill immediately.
A number of the issues you may encounter while using a diamond drill bit might be caused by just 3 reasons: High speed, too much pressure, and insufficient water.
